Need CF Help with Mods installed
05-04-2008, 09:17 PM
#1
Advanced
Thread Starter
Member Since: May 2005
Location: Novato CA
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Need CF Help with Mods installed
Guys: My friend has a 89 roadster with Ellenbrock Roller rockers, 218, CAM and oversized injectors. He needs to get the computer reprogrammed becayse the car is not running right. Had the car tuned and it was ok for a bit. I told him one of you guys would know what to do. Thanks in advance!! Rob
05-06-2008, 02:56 PM
#2
Former Vendor
There are a few different ways to go. You can get the stuff to tune it yourself, see Moates.net. Have a custom chip done by pcms4less. Or you can go to a local tuner and have them do it, there are several in the Bay Area, post in Norcal section for recomendations. If you are going to make future mods then learning to do it yourself will come in handy.
Paul
Paul