Attn Mr. Marcho...
Thread Starter
Burning Brakes
Joined: May 1999
Posts: 999
Likes: 1
From: Gardner KS
Cruise-In II Veteran
Attn Mr. Marcho...
If you need any help with part number info or anything you think I may be able to help with please let me know. I'd be happy to gather any info you need for your FAQ. -Jeff
Le Mans Master
Joined: Mar 1999
Posts: 9,659
Likes: 1,679
From: Fort Worth Texas
2024 Corvette of the Year Finalist - Unmodified
2023 C8 of the Year Winner - Unmodified
2020 Corvette of the Year Finalist (stock)
2019 C7 of Year Winner (stock)
Former Moderator
Cruise-In I-II-III Veteran
Re: Attn Mr. Marcho... (18carfan)
Thanks Jeff! You may turn into a popular guy here (like you're not already in the rest of the forum!!!)
If anyone doesn't know already, 18carfan is THE guy to get parts for you from the dealer. I use him for all of my memcals, and any other misc parts I might need. Contact him for all your parts needs....
The only exception would be if you are swapping from an '870 to a '165 or from an '870/'165 to a '7730/'7727 and you risk a chance of frying an ECM because of crossed wires. In this case I would recommend getting a rebuilt ECM from a store that has a lifetime warranty.... just in case it is 'bad' when you get it and need to exchange it a few times!!!
;)
If anyone doesn't know already, 18carfan is THE guy to get parts for you from the dealer. I use him for all of my memcals, and any other misc parts I might need. Contact him for all your parts needs....
The only exception would be if you are swapping from an '870 to a '165 or from an '870/'165 to a '7730/'7727 and you risk a chance of frying an ECM because of crossed wires. In this case I would recommend getting a rebuilt ECM from a store that has a lifetime warranty.... just in case it is 'bad' when you get it and need to exchange it a few times!!!
;)
Melting Slicks
Joined: Aug 2001
Posts: 2,516
Likes: 0
From: Lockport NY
Re: Attn Mr. Marcho... (Marcho Polo)
...if you are swapping from an '870 to a '165 or from an '870/'165 to a '7730/'7727 and you risk a chance of frying an ECM because of crossed wires...
I had an email conversation with Mike Davis about the pinout diagram he had posted on his site...Supposedly, it was wrong (I say supposedly, because I wasn't sure it had been corrected/updated)...
Does anyone have a working 165 to 730 conversion, and a pinout diagram they wouldn't mind sharing with us others???
I do have one Mike sent me...But it's F-body specific...
