The project..part II
Thread Starter
Former Vendor
Joined: Jun 2001
Posts: 7,204
Likes: 6
From: St Marys PA
The project..part II
Hey guys,
I have been keeping track of my mods in the post titled, "The Project". Since the ECM tuning of these mods will more than likely be a project in itseld, I felt it deserved a post of its own. My question to you experts is I have a pretty good understanding and have programmed many chips for basic performance upgrades, but never really did one that required "troubleshooting" to get it to performe were it should. I would like to hear how some of you guys with similiar mods approached the tuning aspect of your mods. You can see what I plan/am doing to my car. I would like to have the car fairly ready by spring as I do not want to waste all summer getting it tuned, although I understand it is a trial and error type process. With that being said, I would like to know if any of you have advise or a plan of attack that I should use for diagnosis ( I have Moates scanner software). Should I need to do A LOT of programming to get the car functioning or will the stock chip accept the mods with arms wide open? Thanks for your insite and hopefully others planning similiar mods can follow these two posts to guide them through there quest for more power! Its always fun with you guys to lead the way. :cheers:
I have been keeping track of my mods in the post titled, "The Project". Since the ECM tuning of these mods will more than likely be a project in itseld, I felt it deserved a post of its own. My question to you experts is I have a pretty good understanding and have programmed many chips for basic performance upgrades, but never really did one that required "troubleshooting" to get it to performe were it should. I would like to hear how some of you guys with similiar mods approached the tuning aspect of your mods. You can see what I plan/am doing to my car. I would like to have the car fairly ready by spring as I do not want to waste all summer getting it tuned, although I understand it is a trial and error type process. With that being said, I would like to know if any of you have advise or a plan of attack that I should use for diagnosis ( I have Moates scanner software). Should I need to do A LOT of programming to get the car functioning or will the stock chip accept the mods with arms wide open? Thanks for your insite and hopefully others planning similiar mods can follow these two posts to guide them through there quest for more power! Its always fun with you guys to lead the way. :cheers:
