passenger window problem
Thread Starter
Intermediate
Joined: Nov 2001
Posts: 33
Likes: 0
From: Inola ok
passenger window problem
on my vette the passenger window hits when it is closed if the window is all the way rolled up any ideas on this i have read there is a ajustment underneath the door panel please help thanx buddies :cry
Team Owner
Joined: Aug 2000
Posts: 40,156
Likes: 45
From: San Pedro CA
Re: passenger window problem (vent69)
on my vette the passenger window hits when it is closed if the window is all the way rolled up any ideas on this i have read there is a ajustment underneath the door panel please help thanx buddies :cry
Team Owner
Joined: Dec 2000
Posts: 90,675
Likes: 304
From: SE NY
Cruise-In II Veteran
Re: passenger window problem (vent69)
Do you mean that if the window is rolled up and you close the door it hits on something? If so, what: is it too high, too far back, etc.?
Burning Brakes
Joined: Nov 1999
Posts: 795
Likes: 1
From: South Texas
Re: passenger window problem (vent69)
Guys u got to read deep into that post :) this person is talking about when u roll up the window all the way and when u close the door....the back topend part of the window hits the body, it is due to the front part of the window rolling to far up, the "guide stop" most likely is broken since it is plastic.
[Modified by Dualnic, 6:18 PM 12/20/2001]
[Modified by Dualnic, 6:18 PM 12/20/2001]
Racer
Joined: Aug 2001
Posts: 477
Likes: 0
From: Wichita Kansas Kansas
Re: passenger window problem (vent69)
My 93 did the same thing it hit on the rear of the glass near the top. The plastic window guide was bad had it replaced and it works great now. :yesnod: :yesnod: :yesnod:
