Factory rollercam pushrod length?
Thread Starter
Pro
Joined: Feb 2005
Posts: 560
Likes: 0
From: Hamilton New Jersey
Factory rollercam pushrod length?
Does anyone happen to know the length of a factory roller cam pushrod? I need to order a new set and want to make sure I get the right thing.. I believe it may be 7.200 but I would like someone who knows for sure to confirm that for me.. thanks!
Thread Starter
Pro
Joined: Feb 2005
Posts: 560
Likes: 0
From: Hamilton New Jersey
any recommendations on brand? Also I'm not sure of what kind to get, I have world products sr torquer heads with guideplates installed with roller-tipped rockers, factory lt1 rollercam and lifters in a gen I sbc roller engine.. will factory replacements do?
Race Director
Joined: Jan 2002
Posts: 12,261
Likes: 85
From: O'Fallon Missouri
Drifting
Joined: Dec 2005
Posts: 1,313
Likes: 2
From: High Ridge Missouri
Factory are 7.200, but with all the changes you've made you really should measure and get the correct lenght pushrods to keep your valve train geometry correct.
Here's a thread with some good info
http://forums.corvetteforum.com/show....php?t=1682812
Here's a thread with some good info
http://forums.corvetteforum.com/show....php?t=1682812
