Need help
Thread Starter
Racer
Joined: Aug 2001
Posts: 488
Likes: 0
From: Rockwall TX
Need help
I tried to start my car today for the first time since i installed a new motor. I hadn't put the feul line on the intake yet and turned the car over to see if feul would come out. Well no feul came out. I installed a tpis feul pump, and i know it has power. Second, I squirted feul through the throttle body and turned it over to see if it would start. Still nothing. I checked all the ground wires and fuse blocks. Everything looks good and has power. I checked the msd box and everything. It all has power but yet it wont start when i turn it over. Does anyone have any sugestions or experince with problems like this.
Spending his inheritance
Joined: Oct 2001
Posts: 3,150
Likes: 0
From: If the RV's arock'n, don't come aknock'n FL
Cruise-In VIII Veteran
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15
NCM Sinkhole Donor
Re: Need help (Kehrer923)
This is probably a dumb reply, but do you have fuel in the tank?
Thread Starter
Racer
Joined: Aug 2001
Posts: 488
Likes: 0
From: Rockwall TX
Re: Need help (OURRUBY)
Yes the tank has feul. TOday i hooked up my diacom, and when i linked the feul pump turned on for some reason. It works all the time now. My next problem though is the ignition wont work.
Burning Brakes
Joined: Sep 2000
Posts: 1,199
Likes: 1
From: NewCastle IN. USA
Re: Need help (Kehrer923)
I'd start by rechecking all the connections to the motor, ground wires are important too, like the ones above the oil filter area.
you mentioned a MSD box, make sure its connected correctly (per instruction manual) it would be easy to get some of those wires wrong.
it could be a VAT's problem too,
RJ
you mentioned a MSD box, make sure its connected correctly (per instruction manual) it would be easy to get some of those wires wrong.
it could be a VAT's problem too,
RJ
