93 LT1 Coupe FE1 Bilstein issue
Thread Starter
Racer
Joined: Feb 2004
Posts: 251
Likes: 0
From: De Pere WI
93 LT1 Coupe FE1 Bilstein issue
I just got some bilstein hd front shocks and the bottom of the shock will not bolt up to car. The spacing of bolt holes on shock from center to center is about 2 5/8 inches. The spacing of bolt holes on car is about 2 3/4 inches. Any one know if my car is wrong or the shock is wrong?
Pro
Joined: Oct 2007
Posts: 679
Likes: 4
From: TremontonUT UT
Double check with your supplier. If he insist they are right, drill them out or slot the holes. I put KYBs on mine. They came slotted and the bolts were out near the open end of the slot. I suspect they were made this way to fit several applications. Later! Frank
Pro
Joined: Jul 2005
Posts: 741
Likes: 37
From: Athens, GA
What's the P/N of the shocks you got?
When I ordered my Bilsteins last year, the supplier sent shocks for a C2 instead - I recognized it on the rears, since I'd already looked at them, and the mounts were different.
Steven
When I ordered my Bilsteins last year, the supplier sent shocks for a C2 instead - I recognized it on the rears, since I'd already looked at them, and the mounts were different.
Steven
