auto a/c wont work help!
Thread Starter
Former Vendor
Joined: Dec 2005
Posts: 109
Likes: 0
From: Pembroke Pines Florida
auto a/c wont work help!
alright i have a 1996 corvette i am haveing some problems with the A/C when you set the auto temp on (doesnt matter what temp setting) it sets the blower to 0. from what i understand it should never go to 0 it should be 1 - 10 and on the resistor it should be between 4 - 7 volts. now on manual mode it works fine as long as its on inside air, if you command it to mid or low it cuts off the compressor.
i have already replaced the programer, there is no codes and all the temp sensors seem to be reading correctly.
this car is really starting to get to me so any help will be great
Thanks
i have already replaced the programer, there is no codes and all the temp sensors seem to be reading correctly.
this car is really starting to get to me so any help will be great
Thanks
