Miniram peeps, step inside...
Thread Starter
Le Mans Master
Joined: Mar 2006
Posts: 5,262
Likes: 0
From: E. Amherst NY
Miniram peeps, step inside...
What rear gears are you running? And whats your displacement? Most interested in automatic equipped cars.
Like the gears you're running, or what would you change to?
Like the gears you're running, or what would you change to?
Safety Car
Joined: Sep 2003
Posts: 3,599
Likes: 24
From: Orange County NY
St. Jude Donor '10-'11-'12-'13
Not an auto, but... - Mini Ram 383, ZF 6 speed, 4.10 gears. I really like the 4.10s with the 6 speed and my cam. Haven't been to the track yet, but around town it's a lot of fun.
Melting Slicks
Joined: Jan 2008
Posts: 2,065
Likes: 1
From: Jasper Texas
Ok. I have a minirammed 383 with a solid roller and an auto w/2800 stall. I had 3.73s in my dana 36, and the car was a beast off the line and up top. When i swapped the 44 in, I went to 3.45s. They leave a little down low, but its tolerable. Not the best for the track, but I still pulls hard.
Overall, I am very happy with my setup. If I could change some things, I would go with a higher stall and 4.10s.
Overall, I am very happy with my setup. If I could change some things, I would go with a higher stall and 4.10s.
Safety Car
Joined: Jun 2000
Posts: 4,870
Likes: 25
From: Long Island, NY
Auto Tranny with a 4K stall convertor.
The setup runs nice.
Vic
