LT1 conversion

Reply Subscribe

Thread Tools

Search this Thread

Oct 24, 2008 | 11:22 PM

twin540

Thread Starter

Pro

Joined: Feb 2007

Posts: 740

Likes: 2

From: San Antonio TX

LT1 conversion

I'm just finishing my build , and I'm installing an Lt1 conversion . My question is on the fuel rails is the fuel pressure regulator the return or the supply side coming from the supply fuel filter side? Thanks..

Last edited by twin540; Oct 24, 2008 at 11:25 PM.

Oct 24, 2008 | 11:39 PM

daytonaer

Instructor

Joined: Dec 2007

Posts: 197

Likes: 1

From: Pennsylvania

Quote:

Originally Posted by twin540

..... is the fuel pressure regulator on the return .....Thanks..

Yes.

Oct 24, 2008 | 11:55 PM

twin540

Thread Starter

Pro

Joined: Feb 2007

Posts: 740

Likes: 2

From: San Antonio TX

So that means that my supply well feed the passanger side and come back through the regulator?

Oct 25, 2008 | 12:24 AM

daytonaer

Instructor

Joined: Dec 2007

Posts: 197

Likes: 1

From: Pennsylvania

Quote:

Originally Posted by twin540

So that means that my supply well feed the passanger side and come back through the regulator?

Your feed is where the fuel comes from. It also has the filter in this line.

The returning fuel runs through the reg, then shoots back to the tank in a separate line with no filter.

I'm not sure I follow you, as where your lines are depends on what you are using or fabricated. Your using what LT1 rails? Most exit on the drivers side (feed and return).

Sorry for the confusion, fuel in from tank>injectors>regulator>return to tank. Don't worry about what side its on?

I have a feeling I'm answering a question your not asking.

Oct 25, 2008 | 10:13 AM

twin540

Thread Starter

Pro

Joined: Feb 2007

Posts: 740

Likes: 2

From: San Antonio TX

fuel in from tank>injectors>regulator>return to tank.

Got it .

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump