Question about '85 computer
Thread Starter
Instructor
Joined: Nov 2008
Posts: 170
Likes: 0
From: Odessa Tx
Question about '85 computer
I have an 85 that I purchased from an individual who has rebuilt the motor with a mild cam and dome pistons. I know that the chip will not work for the rebuilt motor so I need to know what system to buy as far as hardware is concerned to burn the chip with the new tune. I am new to corvettes and motors with computers. Please help me to know what system I need and where I can locate the items that I need. I am confused as far as this motor goes. I would appreciate any help that I can get!!!!!!! ( the guy I got the car from said something about a Moates unit and a tunercats...)
Last edited by buddylee432; Nov 30, 2008 at 10:04 PM. Reason: I decided to just replace the camshaft with a stock cam so that the computer will work with no problems.
Burning Brakes
Joined: Apr 2004
Posts: 762
Likes: 2
From: Huntington ma
Not to Flame you, but to reduce the need to type out what has already been entered, over and over...
read the sticky at the top of this forum: http://forums.corvetteforum.com/c4-s...ction-faq.html
If, after going through That series of posts, you still have specific questions come back and ask them. You will probably find most of what you need to know in there already.
read the sticky at the top of this forum: http://forums.corvetteforum.com/c4-s...ction-faq.html
If, after going through That series of posts, you still have specific questions come back and ask them. You will probably find most of what you need to know in there already.
