EQ Cylinder heads.
Thread Starter
Team Owner
Joined: Oct 2004
Posts: 81,241
Likes: 3,063
From: altered state
St. Jude Donor '05
EQ Cylinder heads.
Anyone try these out before, feedback?
http://www.eqcylinderheads.com
http://www.aaeq.net/Enginequest/Cyli...s/flow_numbers
http://www.eqcylinderheads.com
http://www.aaeq.net/Enginequest/Cyli...s/flow_numbers
Last edited by cv67; Dec 7, 2008 at 12:42 AM.
Advanced
Joined: Feb 2006
Posts: 72
Likes: 2
From: Red Oak Tx
these are a VERY nice head. Only make cast iron heads but they are a step above Iron Eagles and slightly better than the RHS and pro Action heads.
Very popular in dirt track racing that requires an iron head.
We use the the 235's on sprint cars and winged modifieds (388-421 cubes spinning 7200-8000 RPM) and the 220's on 355-360 cube set ups.
The 200's will make a nice street head for most cars.
Lloyd
Very popular in dirt track racing that requires an iron head.
We use the the 235's on sprint cars and winged modifieds (388-421 cubes spinning 7200-8000 RPM) and the 220's on 355-360 cube set ups.
The 200's will make a nice street head for most cars.
Lloyd
