When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've still got to capture the C5's that were there today...... And one Viper.
That's not me in the car, that was a guy from Speedworks. They did a great job today getting the cars in and out quickly.
Oh yeah.... I won't bother to save the first run when the guy left my emergency brake on!!! :eek: :eek: :eek: :eek:
It took a long time to get to 5500 rpm with the brake on. The guy standing next to me mentioned how much my rear brakes were sparking and glowing after that run! :rolleyes: :rolleyes: :rolleyes:
They realized what they did and deleted that run and started over! I think I pulled over 100RWHP with the parking brake on!
Re: [VIDEO] My Three Dyno Pulls From Today.... (Vic'89)
Cool videos !
BTW, do you know what the oil and coolant temps were ?
Vic
I had Diacom on before pulling in..... it was around 45 or 50 degrees outside when I was warming the car up, so I wanted to make sure the oil temp was up...... I warmed the car up until the oil was at 150 and the water was around 180 when the oil warmed up. They shut the car off between runs while they talked about the numbers and a/f ratios.... so I don't think the car got any warmer.
Also, my car was running really lean at WOT.... 14.2:1 on every run! I need to fix this in my chip. I knew it was running a bit lean, but I had no idea it was that bad! Maybe if I get that striaghtened out, I'll get another hp or two.
Re: [VIDEO] My Three Dyno Pulls From Today.... (Glock'94)
:eek: :cool: :cool: :cool: :cool:
Any other video's Craig.. I wish I could have been there today :(
Oh, I've got many runs on tape, just need to convert them! All the others are C5's... lots of Z06's! And a Viper at the end.... I've got to get up early tomorrow, so it'll probably be tomorrow night before I can convert and upload the others. Got a bunch of pics I need to upload too.
Re: [VIDEO] My Three Dyno Pulls From Today.... (Marcho Polo)
:eek: :cool: :cool: :cool: :cool:
Any other video's Craig.. I wish I could have been there today :(
Oh, I've got many runs on tape, just need to convert them! All the others are C5's... lots of Z06's! And a Viper at the end.... I've got to get up early tomorrow, so it'll probably be tomorrow night before I can convert and upload the others. Got a bunch of pics I need to upload too.
From: No more yankee my wankee, the Donger is tired!
Re: [VIDEO] My Three Dyno Pulls From Today.... (Glock'94)
Looks like a wonderful shop :rolleyes:
They leave the parking brake on, every dyno place I have been to does a pull from 40mph, unless it's an auto
Good numbers :confused: :confused:
I had my car dyno'ed there.. it's a great shop.. what's up with the roll eyes thing and the parking break thing?
Read Craigs original post, they ran the damn thing all the way up with the parking brake on. Yea, great shop, maybe after they paid for a new rear brake job.
Re: [VIDEO] My Three Dyno Pulls From Today.... (Jeffvette)
Looks like a wonderful shop :rolleyes:
They leave the parking brake on, every dyno place I have been to does a pull from 40mph, unless it's an auto
Good numbers :confused: :confused:
I had my car dyno'ed there.. it's a great shop.. what's up with the roll eyes thing and the parking break thing?
Read Craigs original post, they ran the damn thing all the way up with the parking brake on. Yea, great shop, maybe after they paid for a new rear brake job.
:eek: :eek: :eek: Didn't see that post! Guess I better find it. The guys at speed works have been great for me!
From: No more yankee my wankee, the Donger is tired!
Re: [VIDEO] My Three Dyno Pulls From Today.... (Glock'94)
. :eek: :eek: :eek: Didn't see that post! Guess I better find it. The guys at speed works have been great for me!
It's under the links for the videos
Oh yeah.... I won't bother to save the first run when the guy left my emergency brake on!!! :eek: :eek: :eek: :eek:
It took a long time to get to 5500 rpm with the brake on. The guy standing next to me mentioned how much my rear brakes were sparking and glowing after that run! :rolleyes: :rolleyes: :rolleyes:
They realized what they did and deleted that run and started over! I think I pulled over 100RWHP with the parking brake on!