89vert-which slave cyl to get?
Thread Starter
Burning Brakes
Joined: Feb 2000
Posts: 1,206
Likes: 0
From: USA USA
Cruise-In II Veteran
89vert-which slave cyl to get?
It seems that i remember that there are different slave cyl. to get(years)
i know some have a bleeder screw,i don't think mine does.I am going for new clutch mastercyl. and new slave cyl. can i use a different year???
Thanks,
Matt :confused: :confused:
i know some have a bleeder screw,i don't think mine does.I am going for new clutch mastercyl. and new slave cyl. can i use a different year???
Thanks,
Matt :confused: :confused:
Instructor
Joined: Mar 2001
Posts: 144
Likes: 0
From: San Diego, Cal
Re: 89vert-which slave cyl to get? (6spd.89)
i used the later one off of a 94 it worked i think they are different . when i changed the slave i also changed the braided line that came off of the 94
ps napa sells them
ps napa sells them
Burning Brakes
Joined: Apr 2001
Posts: 799
Likes: 1
From: Fremont CA
Re: 89vert-which slave cyl to get? (6spd.89)
I replaced my "early" slave cyl. with the later one. Early cyl. has the bleed nipple on the side (GM says to break it off for clearance); late has the bleed nipple on the bottom. I don't think the early hose will line up with the later cyl. If I remember correctly there is only one master for all years. I replaced master, slave, and hose all at once. Works for me!
