C4 Ground Affects
Thread Starter
Former Vendor
Joined: Jul 2001
Posts: 709
Likes: 3
From: Plainfield, IL
C4 Ground Affects
Looking to add ground affects to your C4? We have the best available. Originally designed by Jeff Nowicki of SpectreWorks with wind tunnel help from GM when he was racing in World Challenge.
Liteweight vaccum bagged fiberglass hood with heat extractor vents behind the radiator and above the brakes. Hood weighs just 22 pounds. (does not come painted red) Must be mounted with hood pins. $1300
Front Fascia, hand laid fiberglass with gelcoat finish. Does not come with brake ducts cut in it. $700
Liteweight vaccum bagged fiberglass Splitter/Undertray. Weighs just 6.5pounds. $700
Liteweight vaccum bagged fiberglass Rear Wing. Weighs just 6 pounds.
60" long x 15.25" wide. $900
Liteweight vaccum bagged fiberglass Roof. Weighs just 4 pounds. $500
Hoods are made to order, all other parts are in stock and ready to ship.
Robert Finlayson
Performance AFX Motorsports
630-844-0089
Liteweight vaccum bagged fiberglass hood with heat extractor vents behind the radiator and above the brakes. Hood weighs just 22 pounds. (does not come painted red) Must be mounted with hood pins. $1300
Front Fascia, hand laid fiberglass with gelcoat finish. Does not come with brake ducts cut in it. $700
Liteweight vaccum bagged fiberglass Splitter/Undertray. Weighs just 6.5pounds. $700
Liteweight vaccum bagged fiberglass Rear Wing. Weighs just 6 pounds.
60" long x 15.25" wide. $900
Liteweight vaccum bagged fiberglass Roof. Weighs just 4 pounds. $500
Hoods are made to order, all other parts are in stock and ready to ship.
Robert Finlayson
Performance AFX Motorsports
630-844-0089
Race Director
Joined: Nov 2003
Posts: 12,221
Likes: 446
From: Overland Park Kansas
2020 Corvette of the Year Finalist (appearance mods)
C4 of Year Winner (appearance mods) 2019
Neat stuff. I assume this is all strickly for racing?
For example, T.Pro's lightweight hoods are not recommended for the street (structural issues). And, the front bumper lacks turn-signal cutouts. So, clarification on application for all these parts might be in order.
Pics of this stuff on a car would be good too!
gp
For example, T.Pro's lightweight hoods are not recommended for the street (structural issues). And, the front bumper lacks turn-signal cutouts. So, clarification on application for all these parts might be in order.
Pics of this stuff on a car would be good too!
gp
pics, I wish I had some of that stuff
