HAL QA1 Shock, Brian C.
Thread Starter
Instructor
Joined: Jun 2001
Posts: 193
Likes: 0
HAL QA1 Shock, Brian C.
My friend in the brown truck just delivered a set of adjustible HAL shocks. While installing the rears I noticed the HAL's are about 1 inch shorter at full extension. Collapsed height is the same.
Does any one know if this is normal for the C4 replacements? I did not install the shocks for fear of damaging them and voiding the warranty. I recall Brian Cunninham had a set of these. Any input Brian?
Thanks for the help guys, I'll call HAL on Monday if nothing else.
Buck.
[Modified by Buck96LT4, 2:09 PM 1/27/2002]
Does any one know if this is normal for the C4 replacements? I did not install the shocks for fear of damaging them and voiding the warranty. I recall Brian Cunninham had a set of these. Any input Brian?
Thanks for the help guys, I'll call HAL on Monday if nothing else.
Buck.
[Modified by Buck96LT4, 2:09 PM 1/27/2002]
Team Owner
Joined: Nov 1999
Posts: 32,782
Likes: 11
From: Former NCM Drag Racing coordinator, National director Corvette Challenge Spring Hill, Tennessee: Whiting, New Jersey
Cruise-In VI Veteran
Cruise-In VII Veteran
Re: HAL QA1 Shock, Brian C. (Buck96LT4)
about 1 inch shorter at full compression. Collapsed height is the same.
compression & collapsed
Isn't that the same?????????????????????????
compression & collapsed
Isn't that the same?????????????????????????
