Lowering 87 Corvette
Thread Starter
Le Mans Master
Joined: Mar 2001
Posts: 9,464
Likes: 1
From: Modesto CA
Lowering 87 Corvette
I'm thinking about ordering the lowering kit from MAD, and having it put on. I've been meaning to get an alignment, so I think this would give me a good reason to. :D Does anyone have any BAD results with lowering? I'm going going to pull my brake calipers off, paint them, and put a line lock on, so I'm gonna need my brakes bled too. :D
Drifting
Joined: Oct 1999
Posts: 1,338
Likes: 0
From: Raleigh, NC
NC Events Coordinator
Re: Lowering 87 Corvette (TIMSPEED)
Wassup Tim. Once u lower it you'll never want to ride at factory height ever again ;) Are u doing the front and back or just the back?
brian
brian
Thread Starter
Le Mans Master
Joined: Mar 2001
Posts: 9,464
Likes: 1
From: Modesto CA
Re: (scorp508)
Does the MAD kit come with the 88-96 front spring brackets? Or just the pads.
[Modified by TIMSPEED, 3:32 PM 2/7/2002]
Team Owner
Joined: Mar 2000
Posts: 83,383
Likes: 87
From: Boston, MA
Why would that matter Scorp? We have 87's. :confused:
Safety Car
Joined: Jul 2001
Posts: 3,524
Likes: 1
From: Pinellas Florida Misfit
Cruise-In III Veteran
Re: (Snackdragons)
lowering a vette has always seemed pretty pointless unless its a show car
/DSC00006.JPG)
None of that 3 inch gap anymore between the tire and the body!
[Modified by Springer's 95, 5:47 PM 2/7/2002]
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Safety Car
Joined: Jul 2001
Posts: 3,524
Likes: 1
From: Pinellas Florida Misfit
Cruise-In III Veteran
Re: (Snackdragons)
That 3 inch gap you have in the wheel well... looks like a 4X4 :D I had that on mine and didn't like the look of it at all. My front end sat higher then yours thou by the looks of the your picture. I took the rear down 2 inchs and the front down 1.5
And my ride quailty improved after lowing it... so much as even my girlfriend noticed it.
[Modified by Springer's 95, 5:59 PM 2/7/2002]
And my ride quailty improved after lowing it... so much as even my girlfriend noticed it.
[Modified by Springer's 95, 5:59 PM 2/7/2002]
Racer
Joined: Dec 2000
Posts: 300
Likes: 0
From: Fairfield CT
Re: (Springer's 95)
had an 84 z51 with the 4+3, and no options. that thing handles SWEET.
My 96 i can drive everyday and not hurt my back, but i want to swap in late 80's sport seats. The 96 also had a bit of wheel hope before i put the kit on (it originally had base suspension with worn shocks)
I am a fan of soft springs, stiff shocks and bars on a street car. Also, the added hieght helps when you hit a bump in the twisties.
My 96 i can drive everyday and not hurt my back, but i want to swap in late 80's sport seats. The 96 also had a bit of wheel hope before i put the kit on (it originally had base suspension with worn shocks)
I am a fan of soft springs, stiff shocks and bars on a street car. Also, the added hieght helps when you hit a bump in the twisties.
Pro
Joined: Sep 2000
Posts: 604
Likes: 0
From: clovis ca usa calif
Re: Lowering 87 Corvette (TIMSPEED)
C-4 vetts that arent lowered look like off road vehicles. Coast Corvette in Anaheim lowered mine and i would'nt have it any other way. it handles soooooo much better :cool:
