Replace DERM 90'

Reply Subscribe

Thread Tools

Search this Thread

Jul 11, 2009 | 11:59 AM

jimmers

Thread Starter

Safety Car

Joined: Mar 2005

Posts: 4,723

Likes: 11

From: Winnipeg Manitoba, Canada

Replace DERM 90'

I'm finally getting around to replacing the DERM in my 90'. I've read through the FSM and am just wondering if anyone has an easier way then the FSM says. Easier and faster is always nice. Thanks!

Jul 11, 2009 | 02:31 PM

davidwj

Advanced

Joined: May 2007

Posts: 78

Likes: 0

From: Colorado Springs CO

Not that I have found. I took mine out and sent it off for repair this last winter. I still have an issue, checking the grounding next, as the frame rail sensors ohmed out correctly.

Jul 11, 2009 | 03:36 PM

jimmers

Thread Starter

Safety Car

Joined: Mar 2005

Posts: 4,723

Likes: 11

From: Winnipeg Manitoba, Canada

Quote:

Originally Posted by davidwj

Not that I have found. I took mine out and sent it off for repair this last winter. I still have an issue, checking the grounding next, as the frame rail sensors ohmed out correctly.

How hard was it to remove the derm? How long did it take about?

Jul 11, 2009 | 05:59 PM

0grandmastercorvette

Former Vendor

Joined: Apr 2009

Posts: 766

Likes: 3

From: Charlotte North Carolina 704-394-5150

The right tools at hand it took me 1.5 hrs to remove the "stuff" required to get to it and get it out. Fourth one I have done. Going back together is another thing ...entirely.
"DUB"

Jul 11, 2009 | 06:05 PM

jimmers

Thread Starter

Safety Car

Joined: Mar 2005

Posts: 4,723

Likes: 11

From: Winnipeg Manitoba, Canada

Quote:

Originally Posted by grandmastercorvette

The right tools at hand it took me 1.5 hrs to remove the "stuff" required to get to it and get it out. Fourth one I have done. Going back together is another thing ...entirely.
"DUB"

Great, that doesnt sound reassuring.

Reply Subscribe