Paging HighHopes
Drifting
Joined: Mar 2001
Posts: 1,636
Likes: 3
From: Lafayette IN
Re: Paging HighHopes (Anguish)
Yes and no.
I have all of my pinouts on the wiring diagrams labled in ink, not on my computer. I have a scanner so that part is not a problem. What IS a problem is that there were a few last minute changes that I made regarding grounding, sensor common, and the secondary bank of injectors. These all relate to the TPS/MAP/??? sensors.
The parents are coming up to my place tomorrow. This is not good because a) I am a bachelor and have no reason to keep my place clean, b) I have to finish up my mom's car before she arrives and c) this was a tough week and I have about 36 hours of sleep to catch up on by this weekend.
But in reality, I have everything documented to get a 870 system transfered over to a 730 ECM. I will make a separate post with the info on Sunday. Before I do it though, I am going to make sure that I give credit where credit is due, which means finding my old hard drive (I did mention my place was a little disorganized, didn't I???) and making sure I don't leave out any names.
In a nutshell, I will post the stuff on Sunday. If I post it under a different link, I will post the thread addy here.
In the meantime, have you checked out
http://forums.corvetteforum.com/zerothread?id=119460
That was the old hangout before the new board was implemented.
-Matt-
I have all of my pinouts on the wiring diagrams labled in ink, not on my computer. I have a scanner so that part is not a problem. What IS a problem is that there were a few last minute changes that I made regarding grounding, sensor common, and the secondary bank of injectors. These all relate to the TPS/MAP/??? sensors.
The parents are coming up to my place tomorrow. This is not good because a) I am a bachelor and have no reason to keep my place clean, b) I have to finish up my mom's car before she arrives and c) this was a tough week and I have about 36 hours of sleep to catch up on by this weekend.
But in reality, I have everything documented to get a 870 system transfered over to a 730 ECM. I will make a separate post with the info on Sunday. Before I do it though, I am going to make sure that I give credit where credit is due, which means finding my old hard drive (I did mention my place was a little disorganized, didn't I???) and making sure I don't leave out any names.
In a nutshell, I will post the stuff on Sunday. If I post it under a different link, I will post the thread addy here.
In the meantime, have you checked out
http://forums.corvetteforum.com/zerothread?id=119460
That was the old hangout before the new board was implemented.
-Matt-
Drifting
Joined: Mar 2001
Posts: 1,636
Likes: 3
From: Lafayette IN
Re: Paging HighHopes (HighHopes85)
In a nutshell, I will post the stuff on Sunday. If I post it under a different link, I will post the thread addy here.
