Quick X-Pipe Question
08-12-2009, 03:22 PM
#1
Safety Car
Thread Starter
Member Since: Feb 2000
Location: MANDEVILLE, LA La
Posts: 3,771
Likes: 0
Received 0 Likes
on
0 Posts
Quick X-Pipe Question
What size X-Pipe should I buy for my 95' Range from 2.25",2.50" & 3.0" in. Inlets? Replacing the Resonator.Going with Magnaflow.
08-12-2009, 03:29 PM
#2
Melting Slicks
Since your factory pipes are 2.75"
2.25" and 2.5" are too small... (though the resonator necks down to 2.25" at the inlet/outlet)
3 inch is too large without cobbling...
you'll need a 2.75" X-pipe, which a few of the regulars have gotten from me, just ask around
2.25" and 2.5" are too small... (though the resonator necks down to 2.25" at the inlet/outlet)
3 inch is too large without cobbling...
you'll need a 2.75" X-pipe, which a few of the regulars have gotten from me, just ask around
08-12-2009, 07:32 PM
#3
Safety Car
Thread Starter
Member Since: Feb 2000
Location: MANDEVILLE, LA La
Posts: 3,771
Likes: 0
Received 0 Likes
on
0 Posts
How much do you sell your X-Pipes for?
And can you E-Mial me Pictures of one?
bigd21249@charter.net
Thanx
Dennis
And can you E-Mial me Pictures of one?
bigd21249@charter.net
Thanx
Dennis
