Coolant temp sender wiring
Thread Starter
Navigator
Joined: Aug 2009
Posts: 9
Likes: 0
Coolant temp sender wiring
I have a 1986 that the previous owner unhooked the coolant temp sensor. This is the one that is on the engine block passenger side that sends the signal for the dash gauge. They have unhooked the wires and evidently clipped them off somewhere.
Does anyone have the diagrahm for this so I can trace the wiring out and get it working again?
Does anyone have the diagrahm for this so I can trace the wiring out and get it working again?
Le Mans Master
Joined: Aug 2000
Posts: 8,838
Likes: 31
From: Australia
There is a wiring loom on pass side rear that runs down to the starter that has the starter control wire , the knock sensor and the temp gauge.( as well as the main batt feed to starter )
Green wire in this loom is temp gauge wire.In stock form it comes up from underneath to the sensor in head
Green wire in this loom is temp gauge wire.In stock form it comes up from underneath to the sensor in head
