Intermittent Code 36...
Thread Starter
Race Director
Joined: Jul 2000
Posts: 16,487
Likes: 2,376
From: Out Where the Buses Don't Run, Eglin AFB/ Niceville FL
2025 C8 Z06/7/E-Ray of the Year Finalist - Unmodified
2022 Corvette of the Year Finalist -- Modified
2021 C6 of the Year Winner - Modified
2020 C7 of the Year Finalist -- Modified
2020 C6 of the Year Finalist - Modified
Intermittent Code 36...
I keep getting an intermittent code 36 on my 89 L98. I have replaced both MAF burnoff relays, and recently installed a rebuilt MAF sensor with the screen cut out. I don't see any biuld up on the MAF sensor wire and the fault clears and stays gone for days even weeks. The car sees limited use maybe 150 miles per month and currently has 41XXX miles on it. The intake, runners, plenum, throttle body, and injectors were upgraded in 1995. SLP provided most of the upgrades. The car runs great and there is no noticeable stumble or loss of performance when SES light comes on. The only code thrown is a 36. Any ideas? :confused: Thanks in advance. :seeya
Safety Car
Joined: Jun 2000
Posts: 4,870
Likes: 25
From: Long Island, NY
Re: Intermittent Code 36... (89ragtop)
Did you replace both MAF sensor relays ?
If you did that and also replaced the MAF sensor itself, then the next issue might be the computer itself.
Rebuilt computers are about $100.
Vic
If you did that and also replaced the MAF sensor itself, then the next issue might be the computer itself.
Rebuilt computers are about $100.
Vic
