Fan control switch on an 85
Thread Starter
Race Director
Joined: Jun 2009
Posts: 10,428
Likes: 9
From: Southside of Western Norte Americano State of Confusion, ColoFornia
St. Jude '13
Fan control switch on an 85
Im having a peculiar problem.. the Fan relay and all wiring to the switch in the cyl head works fine.. If I ground it the fan comes on as advertised.. the sensor makes and breaks at the appropriate temprature.. the only thing out of the ordinary is instead of a complete closing on the switch it shows about 36 k ohms.. is this a normal number or should it be a complete ground..
