turn sign stalk
Thread Starter
Pro
Joined: Oct 2009
Posts: 679
Likes: 0
From: vero beach florida
turn sign stalk
My turn signal stalk is loose or broken, hard to turn the left turn signal on.
Is this because of a broken stalk or the turn signal switch is broken?
Thanks
I think GM built these so that when you fix 1 problem, 2 more show up.
Is this because of a broken stalk or the turn signal switch is broken?
Thanks
I think GM built these so that when you fix 1 problem, 2 more show up.
Pro
Joined: Dec 2004
Posts: 674
Likes: 1
From: Daytona Beach Florida
When I fixed mine I had to remove the steering wheel to change that switch. Pain in the butt, but worth it. Just be careful when putting it back together. The highbeam rod was difficult to figure out. Shop around for that switch because prices vary widely! Good luck!!
Drifting
Joined: Jul 2009
Posts: 1,287
Likes: 18
From: https://www.facebook.com/groups/OrangeCorvettes/
FYI it's called a 'multi-function lever' in case you search for info on one. The turn signal cam is what you need to repair/replace. Not too hard but you will need to get a steering wheel puller.
