Stroker Wiseco Pistons!!!!!!
Thread Starter
Intermediate
Joined: Feb 2010
Posts: 35
Likes: 0
Stroker Wiseco Pistons!!!!!!
I just received my Wiseco Pro Tru .30 over, -5.4cc, 5.7rod, 3.75 stroke Pistons! Forged in America! 436 Gram weight and tight clearances paired to Hastings' ring kit from them. Almost to pretty to hide away in a cylinder
....
What do you think?
....What do you think?
Last edited by CraZ28; Feb 12, 2010 at 01:03 PM.
Race Director
Joined: Nov 2003
Posts: 12,221
Likes: 446
From: Overland Park Kansas
2020 Corvette of the Year Finalist (appearance mods)
C4 of Year Winner (appearance mods) 2019
Nice! I bought Wiseco's too. Are you sure about the weight though? I suspect they're more like 463g -- with 5.7 rods anyway.
.
Thread Starter
Intermediate
Joined: Feb 2010
Posts: 35
Likes: 0
$583.93 for the complete set of rings, pins, and pistons. A little pricey I know but with forged, moly armor on the skirt, and the quality machining I witnessed last night in the light watching the winter olympics opener. It is well worth it. They also have K1 rods and stroker cranks available too. I opted to get an unbobweighted forged crank to have a rotaiting assembly balanced.
Race Director
Joined: Nov 2003
Posts: 12,221
Likes: 446
From: Overland Park Kansas
2020 Corvette of the Year Finalist (appearance mods)
C4 of Year Winner (appearance mods) 2019
That's kick-azz light! I didn't know Wiseco made them as light as SRP --who also makes a 5.7 piston in the 430's. The 6.0" pistons are under 400g.
My ProTru Wiseco's are heavier. Must be the dish pistons have more weight due to the "rim".
My ProTru Wiseco's are heavier. Must be the dish pistons have more weight due to the "rim".
