Wiring Harness Removal
Thread Starter
7th Gear
Joined: Apr 2010
Posts: 7
Likes: 0
Wiring Harness Removal
I have a 1984 CrossFire who's previous owner ripped half the engine harness off at the firewall (including wires to one of the injectors).
So, how do you pull the wiring harness through the firewall? I've unclamped the engine side, unplugged everything inside, & removed the ECM.
All the dash panels are out, but I'm having trouble removing the main plastic piece. It's caught in the center, and riveted(?) over the steering column.
So, how do you pull the wiring harness through the firewall? I've unclamped the engine side, unplugged everything inside, & removed the ECM.
All the dash panels are out, but I'm having trouble removing the main plastic piece. It's caught in the center, and riveted(?) over the steering column.
Thread Starter
7th Gear
Joined: Apr 2010
Posts: 7
Likes: 0
Well, apparently you can just pull the grommet out towards the engine side once you've stopped caring if it breaks or not. 
It looks like breadbox removal requires sawing through the screws, so I'll leave it alone for now. Thank you Ricekila for all the help!
It looks like breadbox removal requires sawing through the screws, so I'll leave it alone for now. Thank you Ricekila for all the help!
Le Mans Master
Joined: Aug 2000
Posts: 8,838
Likes: 31
From: Australia
Look in between the wires in plug for bolt head
