Testing IAC's
Thread Starter
Instructor
Joined: Nov 1999
Posts: 155
Likes: 0
From: Eureka NV
Testing IAC's
Yikes... I just yanked the engine out of my 84 the other day to put a new crank in it. After I got it back together I balanced the TB's etc. Since then I can not get the IAC's to reset. The 1200 rpm idle is a bit disconcerting! haha Any of you hi-tech guys out there have a procedure for testing IAC's?
Pro
Joined: Jan 2002
Posts: 596
Likes: 0
Re: Testing IAC's (KJones)
not off hand. Try dissconnecting it and seeing if the car will run. (test for bad sensor). To adjust the iac is really quite simple. Pull it out and adjust the spring either clockwise or counter...in your case probaly clockwise to lower the idle speed. good luck
Racer
Joined: Jul 2001
Posts: 253
Likes: 0
Re: Testing IAC's (KJones)
Testing or Adjusting? Here's a good source I found mentioned in this Forum: http://www.geocities.com/jgkov/index.html
Drifting
Joined: Apr 2000
Posts: 1,915
Likes: 0
From: Maurice, LA
