Found Prices for Holley's Stealth Ram....
Thread Starter
Racer
Joined: Jul 2001
Posts: 369
Likes: 0
Found Prices for Holley's Stealth Ram....
Was thinking today I hadn't heard much about this since January so I did some searching and only found 1 place with prices....
Power Pack Version:
http://www.yearone.com/serverfiles/h...hid=826BD12702
Full MPFI Systems:
http://www.yearone.com/serverfiles/h...hid=826BD12703
Is it just me or is Holley pricing themselves out of competition here?
I thought they were trying to fight with the miniram?
Power Pack Version:
http://www.yearone.com/serverfiles/h...hid=826BD12702
Full MPFI Systems:
http://www.yearone.com/serverfiles/h...hid=826BD12703
Is it just me or is Holley pricing themselves out of competition here?
I thought they were trying to fight with the miniram?
Team Owner
Joined: Mar 2000
Posts: 83,383
Likes: 87
From: Boston, MA
Hmmm....
$2060, but with a lot attached.
-$400 for Throttle Body
-$100 Fuel Pressure Regulator
-$250 for Injectors
-$355 for Fuel Rails
------------------------
$955
Plus you can take off more since it has sensors already with it.
$2060, but with a lot attached.
-$400 for Throttle Body
-$100 Fuel Pressure Regulator
-$250 for Injectors
-$355 for Fuel Rails
------------------------
$955
Plus you can take off more since it has sensors already with it.
Burning Brakes
Joined: Dec 2000
Posts: 1,023
Likes: 0
From: Marietta, South Carolina, USA
Re: Found Prices for Holley's Stealth Ram.... (notbob)
Call
Dennis
Fonse Performance
EFI Specialist
609.820.5660
He told me that he would sell me the intake upper and lower with gaskets and screws for $307 and fuel rails for $168, but you will have to get a small cap dis and it looks like it is to tall for the Corvette.
Grumpyvette is installing one now and he is going to keep us posted but it does not look good.
Jay
Dennis
Fonse Performance
EFI Specialist
609.820.5660
He told me that he would sell me the intake upper and lower with gaskets and screws for $307 and fuel rails for $168, but you will have to get a small cap dis and it looks like it is to tall for the Corvette.
Grumpyvette is installing one now and he is going to keep us posted but it does not look good.
Jay
Thread Starter
Racer
Joined: Jul 2001
Posts: 369
Likes: 0
Re: Found Prices for Holley's Stealth Ram.... (MrJay)
Yeah sounds like clearance problems for the vette, but was considering a new hood for my truck which is tpi right now, hehe I wonder if I could rig this up on the truck ;)
Burning Brakes
Joined: Nov 2000
Posts: 1,040
Likes: 2
From: BowlingGreen KY
Re: Found Prices for Holley's Stealth Ram.... (notbob)
Who makes a good scoop that will fit the Corvette hood. If I can get the upper and lower without all the other crap I would go ahead and cut a hole in the hood.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski