When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This comment started a 3 month project on my C4. not sure about the new hp or torque but i really like this cam. no weak spots in rpm range. added several mods porting intake and enlarging runners. 1.6 full roller rockers, custom ecm chip. kept the stock exhaust manifolds on and still runs great. That woke it up alright! rear view mirror shakes at red lights.
Last edited by Street89vette; 02-09-2017 at 12:51 PM.
This comment started a 3 month project on my C4. not sure about the new hp or torque but i really like this cam. no weak spots in rpm range. added several mods porting intake and enlarging runners. 1.6 full roller rockers, custom ecm chip. kept the stock exhaust manifolds on and still runs great. That woke it up alright! rear view mirror shakes at red lights.
This comment started a 3 month project on my C4. not sure about the new hp or torque but i really like this cam. no weak spots in rpm range. added several mods porting intake and enlarging runners. 1.6 full roller rockers, custom ecm chip. kept the stock exhaust manifolds on and still runs great. That woke it up alright! rear view mirror shakes at red lights.
I have a ported base and ported elderbrock high flow runners and a ported plenum all done by a professional. What kind of gains do you think you saw over the stock intake?? i also have a 52mm bbk throttle body for the swap, and I have already done hooker long tube headers and true duals for the exhaust.
Last edited by gman35; 11-04-2021 at 12:07 PM.
Reason: additional comments
I have 1987 vette that I pulled the engine out of. I'm refreshing the engine. I like to get a little more horse power out of it. So I thought a cam swap would be a good idea. Does any one know what the best cam and lift kit for a stock tpi?
Thanks
02-09-2017, 12:49 PM
