Scan Data Review
Thread Starter
Advanced
Joined: Oct 2005
Posts: 96
Likes: 0
From: Ottawa Ontario
Scan Data Review
Hi folks,
Is there a document or table that one can compair scan data from my car to show if the tune is within an acceptable range?
For each of the values within DataMaster or other scan software, what are acceptable values? Not optimum values, just values to indicate where a problem might be?
Thanks for the help.
Is there a document or table that one can compair scan data from my car to show if the tune is within an acceptable range?
For each of the values within DataMaster or other scan software, what are acceptable values? Not optimum values, just values to indicate where a problem might be?
Thanks for the help.
Le Mans Master
Joined: Aug 2000
Posts: 8,838
Likes: 31
From: Australia
This gives some insight but is referenced for turbos so some comments like boost ,etc , not relevent to our cars
http://powertuneplus.com/syclone/tunersguide_dm.shtm
http://powertuneplus.com/syclone/tunersguide_dm.shtm
