Visor repair
Thread Starter
Melting Slicks
Joined: Dec 2008
Posts: 2,772
Likes: 64
From: Mystic CT
Visor repair
I have a local shop here that will recover them if I take them out they don't want the car there for such a small project. They are going to loog at restiching a pulled seam in the drivers side cussion as the leather seems fine but the thread failed right at the seam. I told them it did not have to be perfect as i will swapit with the passeneger cusion to even out the wear.
I was going to take apart the visors and from what i can figure out searching here the mirror seems to hold it all together with some push pins that go through the base material and hold on the lights trim etc. I want to be sure of this before pulling off the fabric as I can not afford new visors at this point.
Dave
I was going to take apart the visors and from what i can figure out searching here the mirror seems to hold it all together with some push pins that go through the base material and hold on the lights trim etc. I want to be sure of this before pulling off the fabric as I can not afford new visors at this point.
Dave
