Cam Tuning............
Team Owner
Joined: Dec 2000
Posts: 90,675
Likes: 304
From: SE NY
Cruise-In II Veteran
Re: Cam Tuning............ (Kwik88)
A few degrees +/- can shift the torque curve. You realy should do it.
You will need
-an index wheel
-a piston stop
-a pointer
-a means of turning the crank manually
You will need
-an index wheel
-a piston stop
-a pointer
-a means of turning the crank manually
Thread Starter
Racer
Joined: Oct 2001
Posts: 262
Likes: 0
From: Palos Hills IL
Re: Cam Tuning............ (Kwik88)
I've talked with a few other guys on the board here that have the same combo that I do. I'm trying to figure out why mine is down on power and track times compared to theirs. Started looking at cylinder pressure being down 30 psi. Thinking cam might have been put in slightly retarded. Does any body know how Lingenfelter recommends the 219 be installed?
Team Owner
Joined: Mar 2000
Posts: 83,383
Likes: 87
From: Boston, MA
Re: Cam Tuning............ (Kwik88)
Does any body know how Lingenfelter recommends the 219 be installed?
