Drivers side knee bolster
Thread Starter
Melting Slicks
Joined: Dec 2008
Posts: 2,772
Likes: 64
From: Mystic CT
Drivers side knee bolster
On the drivers side knee bolster metal part held in with I think 3 bolts there is a place for 5 screws to hold the plastic and carpeted part. The top two seem to be a coarse sheet metal screw what are the 3 at the bottom edge. Me and my old back really not up to crawling under there too long to play around. If someone knows or has 3 out of a parted out car it would be a big help. My cars PO played with a alot and always had parts left over from what I can see. I think this is just about the last of his improvements undone..
Dave
Dave
Instructor
Joined: Jan 2004
Posts: 168
Likes: 4
From: I celebrate their entire catalog
I believe they are M4.2-1 41x20. I got them at a hardware store, Hillman brand. They will be in the nut and bolt aisle, but in the auto specialty drawers. Probably in the Body Bolts drawer, but you'll have a good time looking through all the drawers, at least I did. Lots of neat stuff in them.
