Winter Projects
Thread Starter
Racer
Joined: Jun 2009
Posts: 429
Likes: 0
From: Marlborough CT
Winter Projects
Hey guys. I am doing some minor upgrades over the cold northeast winter. I am dropping her about 1" maybe 1" & 1/2. I am also replacing all of the bushings with the kit from Ecklers. My third and final project is going to be a tune up. My question is this. I plan on getting this kit from Eckers....
http://www.ecklers.com/corvette-tune...1986early.html
Are these good or are there better plugs, wires, and cap/rotor combos to get. I have an 85 vette with 37K and everything is stock. Any info would be appreciated.
http://www.ecklers.com/corvette-tune...1986early.html
Are these good or are there better plugs, wires, and cap/rotor combos to get. I have an 85 vette with 37K and everything is stock. Any info would be appreciated.
Corvette Enthusiast
Joined: Oct 2007
Posts: 6,797
Likes: 2,721
From: So. Cal.
2025 C7 of the Year Finalist- Unmodified
2024 C7 of the Year Finalist - Unmodified
2023 C7 of the Year Finalist - Unmodified
Hey guys. I am doing some minor upgrades over the cold northeast winter. I am dropping her about 1" maybe 1" & 1/2. I am also replacing all of the bushings with the kit from Ecklers. My third and final project is going to be a tune up. My question is this. I plan on getting this kit from Eckers....
http://www.ecklers.com/corvette-tune...1986early.html
Are these good or are there better plugs, wires, and cap/rotor combos to get. I have an 85 vette with 37K and everything is stock. Any info would be appreciated.
http://www.ecklers.com/corvette-tune...1986early.html
Are these good or are there better plugs, wires, and cap/rotor combos to get. I have an 85 vette with 37K and everything is stock. Any info would be appreciated.
Mike
Anything else i should do while i'm in there?
Thread Starter
Racer
Joined: Jun 2009
Posts: 429
Likes: 0
From: Marlborough CT
I assume this is what you are talking about
http://www.ecklers.com/corvette-dist...1981-1991.html
or is there a better one out there?
http://www.ecklers.com/corvette-dist...1981-1991.html
or is there a better one out there?
