O-Ring size
Thread Starter
Instructor
Joined: Aug 2009
Posts: 128
Likes: 0
From: Orem Utah
O-Ring size
Hey guys,
Just did the intake on my 88 and ran into a problem. The o-ring for the line that comes out the back of the fuel rail to go to the cold start injector was bad and fell apart as i took the o-ring out.
So now I have been trying for a few hours now to track down the size of that o-ring so that I can get the car back and running.
Thanks
Nate
Just did the intake on my 88 and ran into a problem. The o-ring for the line that comes out the back of the fuel rail to go to the cold start injector was bad and fell apart as i took the o-ring out.
So now I have been trying for a few hours now to track down the size of that o-ring so that I can get the car back and running.
Thanks
Nate
Le Mans Master
Joined: May 2007
Posts: 8,448
Likes: 27
From: Valparaiso
AS568ADash # NominalID [in.] NominalOD [in.] NominalW [in.] Location
-010* 1/4 3/8 1/16 fuel return line at fuel rail
-011* 5/16 7/16 1/16 fuel supply line at fuel rail
-110 3/8 9/16 3/32 fuel rail cross bars (quantity 4)
-203 5/16 9/16 1/8 fuel injector O-rings (quantity 16)
-106** 3/16 3/8 3/32 cold start injector line at fuel rail
-208** 5/8 7/8 1/8 cold start injector at intake runner flange
BWD 274773 Kit has all the needed orings
http://www.advanceautoparts.com/1/1/...rt-274773.html
-010* 1/4 3/8 1/16 fuel return line at fuel rail
-011* 5/16 7/16 1/16 fuel supply line at fuel rail
-110 3/8 9/16 3/32 fuel rail cross bars (quantity 4)
-203 5/16 9/16 1/8 fuel injector O-rings (quantity 16)
-106** 3/16 3/8 3/32 cold start injector line at fuel rail
-208** 5/8 7/8 1/8 cold start injector at intake runner flange
BWD 274773 Kit has all the needed orings
http://www.advanceautoparts.com/1/1/...rt-274773.html
Last edited by Calderone; Apr 18, 2011 at 02:21 PM.
