INFL REST LIGHT
Thread Starter
Heel & Toe
Joined: Apr 2002
Posts: 18
Likes: 0
From: Greenville SC
INFL REST LIGHT
Ok, I have read numerous posts about the infamous airbag light staying lit on 90 vettes and mine is one of them. I have no trouble codes. Also the seatbelt light on dash stays lit all the time. I have followed all the fixes that I have seen posted, removing each of the sensors and sanding the frame for better ground and so on. Anyone have any ideas?? Thanks :chevy
Burning Brakes
Joined: Apr 2000
Posts: 980
Likes: 2
From: Chandler AZ
Re: INFL REST LIGHT (mfemma)
https://www.corvetteforum.com/techti...D=46&TopicID=2
The above post has more info. Does the car have the original stereo?
The above post has more info. Does the car have the original stereo?
Le Mans Master
Joined: Mar 1999
Posts: 9,663
Likes: 1,682
From: Fort Worth Texas
2024 Corvette of the Year Finalist - Unmodified
2023 C8 of the Year Winner - Unmodified
2020 Corvette of the Year Finalist (stock)
2019 C7 of Year Winner (stock)
Former Moderator
Cruise-In I-II-III Veteran
Re: INFL REST LIGHT (90_roadster)
Does the car have the original stereo?
Burning Brakes
Joined: Apr 2000
Posts: 980
Likes: 2
From: Chandler AZ
Re: INFL REST LIGHT (Marcho Polo)
I don't know if it makes the difference in this case. There was another post recently about a 90 that the seat belt light came on and stayed after an aftermarket stereo was installed. It didn't say however if the INFL light was on. I was kinda fishing.
Mine did it and it was COMPLETELY stock. Mine was the sensor on the passengers side. I got it fixed and a month or so later it blinked again.
v
[Modified by santa claus, 11:03 AM 4/28/2002]
[Modified by 90_roadster, 11:07 AM 4/28/2002]
Mine did it and it was COMPLETELY stock. Mine was the sensor on the passengers side. I got it fixed and a month or so later it blinked again.
v
[Modified by santa claus, 11:03 AM 4/28/2002]
[Modified by 90_roadster, 11:07 AM 4/28/2002]
Advanced
Joined: Mar 2002
Posts: 65
Likes: 0
From: sharpsburg GA
Re: INFL REST LIGHT (mfemma)
This could be a dumb question,but after you removed and cleaned your sensors did you go through the procedure to remove the light. The light will not go out by itself.
Le Mans Master
Joined: Mar 1999
Posts: 9,663
Likes: 1,682
From: Fort Worth Texas
2024 Corvette of the Year Finalist - Unmodified
2023 C8 of the Year Winner - Unmodified
2020 Corvette of the Year Finalist (stock)
2019 C7 of Year Winner (stock)
Former Moderator
Cruise-In I-II-III Veteran
Re: INFL REST LIGHT (mfemma)
The CCM will have it's own trouble codes stored than the ECM. You will check the ECM trouble codes by watching the 'check engine' light. The CCM codes are displayed on the digital dash where the MPH readout is. There is a procedure in the Helms manual to display them. It's quite involved, and I don't have it memorized or I would type it here. It will tell you what part of the INFL REST system is throwing the code.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Instructor
Joined: Aug 2000
Posts: 209
Likes: 0
From: Hilton Head SC
Re: INFL REST LIGHT (mfemma)
I have this same Problem on my 90'. Its been to the dealer but no fix. Now I think either the dash light burned out or they unplugged it but the seatbelt light stays lit. I tried pulling the code off of terminal 'K' like the help section stated but got no codes at all... even the 12 code... anyone have any input on how to get it to throw the code. I tried several grounds but to no avail... I may make this my weekend project (sensor ground cleaning) and do my fuel filter while I'm under there :cheers:
