check ohm's
Safety Car
Joined: Nov 2008
Posts: 4,328
Likes: 15
From: Jacksonville FL
Gonna check VOLTS? Not sure about the 91 but my 85 is set at .54 volts. Easy process, just put one lead of your dvm on the top wire of the connector, then the other on the second wire of the connector. Kinda takes 3 hands or some ingenious thinking to keep the leads on and adjust the TPS.
Search for TPS setting or use your FSM.
Search for TPS setting or use your FSM.
Pro
Joined: Jun 2007
Posts: 626
Likes: 2
From: Coquitlam British Columbia
The voltage for the 1991 is set (just like my 1990) due to the fact that it is a Speed Density set up and NOT MAF. My 1990 was .72 volts and my FSM states between .36 and .96 volts but no way really to get down that low or that high as there is NO adjustment on the TPS.
Bill
Bill
Safety Car
Joined: Nov 2008
Posts: 4,328
Likes: 15
From: Jacksonville FL
The voltage for the 1991 is set (just like my 1990) due to the fact that it is a Speed Density set up and NOT MAF. My 1990 was .72 volts and my FSM states between .36 and .96 volts but no way really to get down that low or that high as there is NO adjustment on the TPS.
Bill
Bill
Team Owner
Joined: Jul 2004
Posts: 28,502
Likes: 3,302
From: Hartford WI
The voltage for the 1991 is set (just like my 1990) due to the fact that it is a Speed Density set up and NOT MAF. My 1990 was .72 volts and my FSM states between .36 and .96 volts but no way really to get down that low or that high as there is NO adjustment on the TPS.
Bill
Bill
