Opti Sealing Question

Reply Subscribe

Thread Tools

Search this Thread

Sep 4, 2011 | 05:06 PM

CAJUN C4

Thread Starter

Safety Car

Joined: Feb 2000

Posts: 3,771

Likes: 0

From: MANDEVILLE, LA La

Opti Sealing Question

Bought a new AC Delco Opti and am wondering if I should take it apart and RTV the casing seals? Or are the gaskets, as is, adequate?
I will Loc-Tite the rotor screws.

Thanx

Sep 4, 2011 | 06:49 PM

STL94LT1

Race Director

Joined: Jan 2002

Posts: 12,263

Likes: 86

From: O'Fallon Missouri

Other than loc-titing the rotor screws, I would leave it "as is".

Sep 4, 2011 | 09:48 PM

Strick

Race Director

Joined: Feb 2003

Posts: 11,672

Likes: 20

From: Lake Wylie SC

As I remember, I put a little RTV around the areas I thought might let water in the opti. With the venting I'm not worried about it any more.

Sep 5, 2011 | 11:03 AM

CAJUN C4

Thread Starter

Safety Car

Joined: Feb 2000

Posts: 3,771

Likes: 0

From: MANDEVILLE, LA La

Ok that's what I needed.As usual...Thanx for the advice / help.

Dennis

Sep 5, 2011 | 02:41 PM

radar502

Safety Car

Joined: Dec 2009

Posts: 4,363

Likes: 429

From: Birmingham Al

I would reseal it . I do on all I install you never know what you might run into ..My 95 has been in a flood ..Just went to a Vett show and got about a I don't know the roads were full or water a mess and a few other times I was glad I sealed the thing up real good..I might me the last time you'll see it for a time...That's just me..