LT4 knock module..will it work on a 95?
Thread Starter
Race Director
Joined: Sep 2000
Posts: 13,985
Likes: 0
From: Hillsborough NH
Cruise-In V Veteran
Cruise-In VI Veteran
LT4 knock module..will it work on a 95?
I've heard about people using the LT4 knock module on LT1's to help increase timing a bit and help on acceleration.
The module is only like $30, but does it fit on a 95, and what is the install procedure?
thanks!
The module is only like $30, but does it fit on a 95, and what is the install procedure?
thanks!
Burning Brakes
Joined: Apr 2002
Posts: 934
Likes: 0
From: MO
Re: LT4 knock module..will it work on a 95? (Mervz)
It will work. There is a little panel on the back of your computer that is held on by 2 screws. Take it off and unplug the stock chip, plug in the LT4 chip.
Thats it!
Thats it!
Race Director
Joined: May 2001
Posts: 14,165
Likes: 9
Re: LT4 knock module..will it work on a 95? (Mervz)
Sure it will work, but it really has it's best benefit on modded cars. Roller rockers make more noise, so that's what it's really all about. I wouldn't expect much gain if your car is stock.
Thread Starter
Race Director
Joined: Sep 2000
Posts: 13,985
Likes: 0
From: Hillsborough NH
Cruise-In V Veteran
Cruise-In VI Veteran
Re: LT4 knock module..will it work on a 95? (Mervz)
Thanks guys! I appriciate the responces!
Does this chip change anyother parameters in the ECM?
For $30, even a small change would be welcome if it included a more refinded program.
Does this chip change anyother parameters in the ECM?
For $30, even a small change would be welcome if it included a more refinded program.
