New motor advice
Thread Starter
Instructor
Joined: Apr 2002
Posts: 126
Likes: 0
From: port saint lucie florida
New motor advice
I have all the parts necessary for my new project and need some advice.
I have a 94 block splayed 4 bolt ,all forged internals for a 383(8.5:1 comp.je pistons), NIB Lt4 heads and intake , hot cam, 1.6 RR,TPIS long tubes, Carroll supercharger(paxton) 10 psi supercharger ,NOS 175 hp wet kit,all the timing and fuel computers necessary to make this project a green light. but...
1. What #/hr injectors to start with?
2. Where is a reasonable place to have the heads ported and prices?
3. Any speculation on HP of the finished product(ecm tuning done correctly)
If I have forgotten any details let me know. thanks in advance...
I have a 94 block splayed 4 bolt ,all forged internals for a 383(8.5:1 comp.je pistons), NIB Lt4 heads and intake , hot cam, 1.6 RR,TPIS long tubes, Carroll supercharger(paxton) 10 psi supercharger ,NOS 175 hp wet kit,all the timing and fuel computers necessary to make this project a green light. but...
1. What #/hr injectors to start with?
2. Where is a reasonable place to have the heads ported and prices?
3. Any speculation on HP of the finished product(ecm tuning done correctly)
If I have forgotten any details let me know. thanks in advance...
Team Owner
Joined: Sep 2001
Posts: 62,171
Likes: 1,735
From: Athens AL
C7 of the Year - Unmodified Finalist 2021
C4 of Year Finalist (performance mods) 2019
Re: New motor advice (old salt)
Injectors-start with #30
as for everything else, the hp=ALOT, porting-somebody in FL may have a good idea
as for everything else, the hp=ALOT, porting-somebody in FL may have a good idea
