seatbelt warning light
Thread Starter
Instructor
Joined: Dec 2006
Posts: 105
Likes: 0
From: biloxi mississippi
seatbelt warning light
On my 90 the seatbelt warnin light stays on. i had the seats out last night and checked the circuit from the seatbelt connection thru the wire connection an up to where it goes into the center console - i unpluged the connection and shorted the circuit and still no change in the seatbelt warrning. this is not a resent problem I am just now getting to it. does anyone have experience with this problem or a wireing diagram with layouts of the circuit i could use to track the problem?
Team Owner
Joined: Dec 2000
Posts: 90,675
Likes: 304
From: SE NY
Cruise-In II Veteran
On my '88 there is a black wire from the seat belt sw into pin A2 of the Audio Alarm Module, located behind the center of the I/P. This module is rectangular with a 6-pin connector.
This wire should be open when the seat belt is engaged; sounds like the wire may be shorted to ground somewhere.
This wire should be open when the seat belt is engaged; sounds like the wire may be shorted to ground somewhere.
Last edited by 65Z01; Mar 8, 2012 at 03:19 AM.
