Burn off module scan information
Thread Starter
Intermediate
Joined: Oct 2011
Posts: 33
Likes: 5
Burn off module scan information
I ordered yesterday the scanner for the obd1 85 corvette. I suspect by reading in the forum that the burn off module may need to be replaced. Getting intermittent 34 codes.
In order not to be removing parts guessing if they are good or not, my question is after doing a scan what information do I look for when the data is sent to my laptop.
Information will be greatly appreciated.
Jdemoya
In order not to be removing parts guessing if they are good or not, my question is after doing a scan what information do I look for when the data is sent to my laptop.
Information will be greatly appreciated.
Jdemoya
Le Mans Master
Joined: Mar 2002
Posts: 5,889
Likes: 2
From: Castro Valley Calif.
St. Jude Donor '03 thru '26
A datalog isn't going to point you toward troubleshooting mechanical problems
You should really be following the FSM diagnostic procedures in cases like this. G/L
You should really be following the FSM diagnostic procedures in cases like this. G/L
