94' Clutch Install
Thread Starter
Pro
Joined: May 2000
Posts: 739
Likes: 67
From: Wichita Kansas
FedEx Bowl 4 St. Jude '09
St. Jude Donor '09-'10-'11-'12-'13-'14
94' Clutch Install
I am considering installing a new clutch in my 94, Does anyone have any advice regarding clutch purchase, and especially adivice on install tips. The car has over 100,000 miles on it and before I start doing any performance enhancements I was going to make sure the clutch/tranny is in good shape.
Thanks
Jason
Thanks
Jason
Melting Slicks
Joined: Apr 2001
Posts: 2,474
Likes: 1
From: Drive it Like You Hate it Cincinnati OH
Re: 94' Clutch Install (Jstockton)
I did the clutch in my LT4 this weekend. It tok me about 8-9 hrs working alone. I bought a stock replacement from a place locally. It is made by LOK and has the same Valeo pressure plate as the original. I paid $265.00 for the disc, pressure plate and Throw Out bearing. Good luck
Safety Car
Joined: Aug 2000
Posts: 4,249
Likes: 0
From: Delaware
Re: 94' Clutch Install (Jstockton)
The clutch on my 94 only lasted about 45K miles :(
I replaced it with Cetnerforce DualFriction $550
Then I also had to replace the stock dm flywheel $780
then labor $400
:(
But since you are doing it yourself you will save on the labor...
Good luck :)
BTW
I like the centerforce so far
I replaced it with Cetnerforce DualFriction $550
Then I also had to replace the stock dm flywheel $780
then labor $400
:(
But since you are doing it yourself you will save on the labor...
Good luck :)
BTW
I like the centerforce so far
Melting Slicks
Joined: Apr 2002
Posts: 3,019
Likes: 0
From: down that one road next to that big tree
Re: 94' Clutch Install (McKVette)
look up some of my other posts, i've all but written a book on 6spd clutch work on the forum. you'd be amaized how cheap you can do it all...i'm in it under 500 for a single mass conversion, disc, plate, whole deal...and it's all RAM stuff..no junk involved
