High RPM miss - solved
Thread Starter
Racer
Joined: Nov 2011
Posts: 274
Likes: 12
From: Louisburg NC
High RPM miss - solved
Just so y'all know;
My '94 developed a bad miss at 4500 RPM and higher. A "hitting the rev limiter" type of miss. This weekend I replaced the stock coil with a MSD coil. Problem solved.
My '94 developed a bad miss at 4500 RPM and higher. A "hitting the rev limiter" type of miss. This weekend I replaced the stock coil with a MSD coil. Problem solved.
Safety Car
Joined: Apr 2011
Posts: 3,660
Likes: 22
Don;t know if its still available...
but the local "rod-shop" Competition Sales of Houston recently had a complete, drop in replacement HEI distributer with a hot coil...the whole enchilada for $88 IIRC...not pieces or an empty shell...a drop in plug it in and go replacement..new. ICM, coil everything. Small cap (i think it was)
Planning on going to get one for myself if there are any left..
but the local "rod-shop" Competition Sales of Houston recently had a complete, drop in replacement HEI distributer with a hot coil...the whole enchilada for $88 IIRC...not pieces or an empty shell...a drop in plug it in and go replacement..new. ICM, coil everything. Small cap (i think it was)
Planning on going to get one for myself if there are any left..
Safety Car
Joined: Sep 2010
Posts: 3,752
Likes: 190
From: Indiana PA
Don;t know if its still available...
but the local "rod-shop" Competition Sales of Houston recently had a complete, drop in replacement HEI distributer with a hot coil...the whole enchilada for $88 IIRC...not pieces or an empty shell...a drop in plug it in and go replacement..new. ICM, coil everything. Small cap (i think it was)
Planning on going to get one for myself if there are any left..
but the local "rod-shop" Competition Sales of Houston recently had a complete, drop in replacement HEI distributer with a hot coil...the whole enchilada for $88 IIRC...not pieces or an empty shell...a drop in plug it in and go replacement..new. ICM, coil everything. Small cap (i think it was)
Planning on going to get one for myself if there are any left..
