Jack pads ?
Thread Starter
Slingshot
Joined: Dec 2001
Posts: 3,817
Likes: 24
From: Charlotte NC
Jack pads ?
Are any of you guys using jack pads like these? If so, how are they working for you?
Do you have a better alternative for the standard steel saddle jack pad that come with most floor jacks?
Do you have a better alternative for the standard steel saddle jack pad that come with most floor jacks?
Team Owner
Joined: Sep 2003
Posts: 25,394
Likes: 2,741
Rather than try to point you to some take a "google image search" for "BMW jacking pucks"
https://www.google.com/search?q=bmw+...w=1213&bih=634
There are two BMW part #'s the C6 guys like and if you do the image search you'll see several different versions red, white, different manufacturers all in the images. There's Corvette Forum links to most all of them. Most are very inexpensive. I don't use them so I can't attest to one being any better than the other!
BTW - Are the wheels sold?
https://www.google.com/search?q=bmw+...w=1213&bih=634
There are two BMW part #'s the C6 guys like and if you do the image search you'll see several different versions red, white, different manufacturers all in the images. There's Corvette Forum links to most all of them. Most are very inexpensive. I don't use them so I can't attest to one being any better than the other!
BTW - Are the wheels sold?
Thread Starter
Slingshot
Joined: Dec 2001
Posts: 3,817
Likes: 24
From: Charlotte NC
Le Mans Master
Joined: Jun 2009
Posts: 6,528
Likes: 752
From: South Dakota
I don't use any different pad on my C4, however I use a hockey puck on my C5.
For the C5's and C6's some kind of pad/puck is needed if jacking from the side. Most of them are made to fit into the oblong holes in the frame that the factory used for shipping tie downs. The BMW jacking pads are one type that fits into these oblong holes and is designed to stay there permanently.
On the C5/C6's I use a hockey puck, but a jack pad like pictured could work well.
For the C5's and C6's some kind of pad/puck is needed if jacking from the side. Most of them are made to fit into the oblong holes in the frame that the factory used for shipping tie downs. The BMW jacking pads are one type that fits into these oblong holes and is designed to stay there permanently.
On the C5/C6's I use a hockey puck, but a jack pad like pictured could work well.
