Rear Shafts
Thread Starter
Pro
Joined: Feb 2012
Posts: 561
Likes: 3
From: Las Vegas NV
St. Jude Donor '14
Rear Shafts
hey guys- I had a post but cannot find it- I am told these are rear shafts for a c4 - does that look to be the case? I don't understand the slip yoke and I guess these are stronger since they are steel the alum. factory ones?
I can email you a bigger picture if you pm me your address. There are splines under the white sleeves, and then a bigger set of splines that look like the rear spindles of my C4.
I can email you a bigger picture if you pm me your address. There are splines under the white sleeves, and then a bigger set of splines that look like the rear spindles of my C4.
Slingshot
Joined: Dec 2001
Posts: 3,817
Likes: 24
From: Charlotte NC
They are not Corvette C4 half shafts. The original C4 half shafts are aluminum and should be able to handle most street and track applications short of some 650+ HP monster. The right photo is the OEM C4 aluminum half shaft.
Team Owner
Joined: Sep 2003
Posts: 25,394
Likes: 2,741
Your original post I mentioned what I felt that they were and a contact to maybe confirm. I'm quite confident of the information in my first post!
http://forums.corvetteforum.com/c4-t...-i-bought.html
http://forums.corvetteforum.com/c4-t...-i-bought.html
