Lighting problem
Thread Starter
Le Mans Master
Joined: Jul 2000
Posts: 7,634
Likes: 325
From: Greenville SC
Lighting problem
Had issue few months ago, change dumb, now it has returned.
Right turn indicator lights, indicating problem on right side. If I use flashers all flash, but from right amber turn signal is dim compared to left. Same result if I turn on right signal when lights are off, but if I turn signal on when light switch is at one click on, then the front right lights don't come on at all!
Seems since flashers work the flasher relay is ok, right?
Is the front right amber turn signal dual filament, since dim, should I change the bulb first and hope it fixes it?
Right turn indicator lights, indicating problem on right side. If I use flashers all flash, but from right amber turn signal is dim compared to left. Same result if I turn on right signal when lights are off, but if I turn signal on when light switch is at one click on, then the front right lights don't come on at all!
Seems since flashers work the flasher relay is ok, right?
Is the front right amber turn signal dual filament, since dim, should I change the bulb first and hope it fixes it?
Thread Starter
Le Mans Master
Joined: Jul 2000
Posts: 7,634
Likes: 325
From: Greenville SC
Think i Found problem. I pulled turn bulb and there is a side spring like contact in the socket, it was broken off. I guess it would make contact sometimes and make the intermittent problem. Now, where to get this socket? Can the white plastic piece be removed from black plastic surround, or do I have to cut the wires and splice in a new complete socket?
Thread Starter
Le Mans Master
Joined: Jul 2000
Posts: 7,634
Likes: 325
From: Greenville SC
Changed socket and it worked for a while, then problem returned. I checked and changed bulb, but still does not blink. Light comes on but doesn't blink except when flashers are on, left turn sign still works. Any ideas?
Safety Car
Joined: Apr 2011
Posts: 3,660
Likes: 22
I'd start going thru each socket to see which is corroded and dirty. If that does not help then I'd head toward the grounds,. and clean and reattach. Have you done any testing with a DVM to see if its low voltage or NO voltage? That will also tell you if its a short or open circuit.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
Thread Starter
Le Mans Master
Joined: Jul 2000
Posts: 7,634
Likes: 325
From: Greenville SC
I pulled the bulb and messed w it. I turned it and put it back in w side contacts reversed, and It blinks. I wouldnt think it would matter. It seems the bulb fits in either way, but not well either way. I got it in so it stays...for now, but doesn't turn much and lock in, like most do. I am afraid I will break it, or detach from base if I push and turn any harder. I hate these bulbs and sockets, should fit better and be easier.