'84 window assembly
Thread Starter
Safety Car
Joined: Jan 2001
Posts: 3,637
Likes: 27
From: Norwalk Ct
'84 window assembly
I have had this 84 for a couple of months, fun addition to my 69, but yesterday the passenger window decided to come up too far, come off the rail and fall inside the door!! Anyways I took it apart today and it looks like somewhere had been in there before me and had changed the window motor...but there doesn't seem to be any upward stop on the runner, am I missing something? Does anyone have a good diagram of how the assembly should be installed and adjusted?
thanks
Nick
thanks
Nick
Drifting
Joined: Mar 2013
Posts: 1,952
Likes: 239
From: Venice Cali.
On the window in front there should be a peg in the window. Also should be an L shaped bracket about 3 inches down inside the front of the door. That stops the front. The rear is stopped by the regulator. @ ten mm nuts attach to the panel and the door(up at an angle) near the rear of door. The regulator meets up with the 2 prong hook inside the rear area of door. You adjust front L up and down in front and the rear hook shaped thing up and down in the back then tighten to stop the window. Hope that makes sense. Mabey it fell down to the bottom. The L is upside down BTW
