'84 coupe seatback
Melting Slicks
Joined: Jul 2000
Posts: 2,801
Likes: 2
From: Amarillo TX
Re: '84 coupe seatback (rfmenta)
This is going to be tough to explain, but I'll try. Start at the head rest about the middle of it on either side. Push sideways on the foam and you should feel it unhook. There is a wire molded into the foam that snaps into a spring clip on the seat back. There will be one on each side of the head rest. (2 per seat) Once the head rest is loose, lean the foam pad forward and reach behind it, down about 3/4's of the way there will be a wire bail that snaps into a couple more spring clips on the seat back. Pop them loose and remove the pad. Going back on is just the reverse, but the head rest is really tough to snap the wires back into place.
Good Luck,
Dave
Good Luck,
Dave
