Headlight bushing question
Thread Starter
Melting Slicks
Joined: Jul 2004
Posts: 3,277
Likes: 32
From: Mission Viejo California
Headlight bushing question
Hi guys. I have the headlight off the car and took the cover off the headlight motor as the internet instructions indicated. When trying to pull out the plastic gear with the metal backing, it mentions to stick a pick or small screwdriver in the middle to help pull it out. The center on mine is solid however. Do I just need to use a pipe wrench or similar to hold the center post and jiggle it loose? Here's a few photos....
Instructor
Joined: Mar 2013
Posts: 139
Likes: 0
on the other side of the motor where the shaft comes out. there it a pin u have to hammer out. once that pin is out it comes right out. go on you tube and search headlight gear removal for a c4 corvette. there are plenty of videos on how to do it.
Hi guys. I have the headlight off the car and took the cover off the headlight motor as the internet instructions indicated. When trying to pull out the plastic gear with the metal backing, it mentions to stick a pick or small screwdriver in the middle to help pull it out. The center on mine is solid however. Do I just need to use a pipe wrench or similar to hold the center post and jiggle it loose? Here's a few photos....
